|5 Degree Celsius
|Density at 27 Degree Celsius
|Keep in original containers in cool, dry conditions. Store above 00C to prevent damage by frost.
- Wall / ceiling angles, cornices
- Door and window frame surrounds
- Fitted furniture
- Replacement window installations
- Easy to apply and finish
- Excellent adhesion to most building materials
- Fast setting
- Flexible seal
- Can be over painted or papered
Decofi ll acrylic sealant is a white acrylic based gap fi ller in paste form for application from a cartridge. It is very quick and easy to apply and can be finished or smoothed off with a spatula or a damp sponge. It sets quickly on application and will accept paint or wallpaper fi nishes.
Typical uses for Decofi ll acrylic sealant are gaps between skirtings, window and door frames, fitted furniture units and ceiling cornices and adjacent plaster work. Where replacement windows are installed Decofi ll acrylic sealant can be used to make good between new frames and interior plaster work.
Decofi ll acrylic sealant is primarily applied as a triangular fi llet into angles. Gaps up to 25mm wide can be fi lled using Decofi ll acrylic sealant without slumping although the larger volume of compound will take longer to set and will give some shrinkage on setting, forming a concave surface.
The flexible filler for interior gaps and cracks, shall be Decofi ll acrylic sealant, which shall exhibit excellent adhesion to most building materials and compatible for application over walls/ceiling cornices, door and window frame surrounds, fi tted furniture, skirtings, staircase, etc., easily applied and finished. It shall be fast setting, nonstaining, and form a flexible seal, which can be over painted or papered just after 8 hours at 300C. Cured Decofill acrylic sealant shall have a Shore ‘A’ hardness of about 30, and resist water. It shall fully cure by loss of water. It shall have a solids content minimum of 80% and maximum density of about 1.7 kg/litre at 25 0C and shall be easily applied with the help of a sealant gun.
Application ins tructions
Surfaces shall be clean, dry and free from grease. Decofill acrylic sealant adheres to most materials common in the building industry including concrete, brickwork, plaster, wood and glazed tiles.
Priming is not normally required. Decofill acrylic sealant should not be used in poorly ventilated spaces or in prolonged high humidity conditions.
On very porous surfaces priming is advised. A suitable primer can be made by diluting and mixing thoroughly one part of Decofi ll acrylic sealant with two parts of water. Apply by brush and allow to dry.
Cut the conical tip of cartridge end thread. Screw on nozzle,cut the nozzle at 450 to required size and fi t into a sealant gun.
Extrude sealant directly into joint ensuring complete contact with joint faces.
Tool the sealant off within 15 minutes of application using a scraper or tooling stick dipped in clean plain water. Where a particularly neat finish is required, use masking tape along the joint edges. Remove immediately after tooling.
- Easy to apply and finish
- Fast Absorbing