Call 08048968420 81% Response Rate

our range

Fosroc Rust Remover

Offering you a complete choice of products which include fosroc reebaklens rr rust remover.
Fosroc Reebaklens RR Rust Remover

Fosroc Reebaklens RR Rust Remover

Rs 349  / BottleGet Best Price

Minimum Order Quantity: 10 Bottle

Product Brochure

Usage/ApplicationRust remover cleaning and etching agent
Packaging Size1Litre
Packaging TypeBottle
Shelf Life12 Months
StorageKeep in original sealed containers under normal warehouse conditions.
Specific Gravity1.22 @ 25 Degree Celsius
Coverage AreaApprox. 2.0 m2/L
GradeReebaklens RR
Main uses

Reebaklens RR is used as a rust remover from steel bars prior to encasing in concrete / microconcrete. It can also be used on other steel surfaces prior to coating with epoxy systems.


Safe with metals (except zinc and galvanised steel), wood, glass, plastic and rubber. No corrosive action.

Application instructions For rusted metal (iron base) Apply Reebaklens RR with brush for complete wetting of rusted metal surface and allowed to react it for 16-24 hours. After 24 hours, a white layer will appear which will protect further corrosion of metal / steel for about 5-7 days. Before applying protective coating, the surface should be wire brushed and thoroughly cleaned for dust with dry cloth.

Removal of rust and mill scale Prewet the fl oors, then using a stiff bristle broom, brush the aff ected areas with a solution of Reebaklens RR cleaning agent and water. Strength of the solution required will vary but should be between 1 : 1 and 1 : 4 (Reebaklens RR cleaning agent to water).

When the action has fi nished, wash down thoroughly with clean water. Wire brush again to remove remaining loose material and fi nish by thoroughly washing down with clean water. Repeat if necessary. High degree of rust or scale can be removed by soaking in the Reebaklens solution for 60 minutes.


Health & Safety

Reebaklens RR cleaning agent is acid based and should be handled with care. It attacks zinc, aluminium and putty. If in doubt about its eff ect on a material, test a small area before application.  

Avoid contact with skin. Rubber gloves and goggles should be worn. Wash spillages with plenty of water. Enclosed areas should be well ventilated. If contact with eyes occur, wash immediately with water and seek medical advice.

Fire Reebaklens RR cleaning agent is non fl ammable

Additional information Technical data and guidance can be provided on a wide range of admixtures, concreting aids, grouts, repairs, protective coatings and the Nitoflor range of industrial flooring systems which includes non metallic floor hardeners, epoxy floor coatings and self levelling fl oor toppings, epoxy heavy duty abrasion resistant screeds. Separate datasheets are available on these products 

View Complete details

get quote request a call back